ELIO
CAVAGNA s.r.l.
|
|
Longitudinal Shear Cutting Systems and Modules
. . . to cut PAPER, CARDBOARD, PLASTIC FILM, VARIOUS BONDED
MATERIALS, ALUMINUM, TEXTILES, NON WOVENS, FIBER GLASS AND CARBON-FIBRE-WEBS,
etc.
S-STILO Series Pneumatic Shear Knife Holders
- New self locking pneumatic blade carriage, mounted on ball slides
- Air loaded knife holder with “STILO®” flexible blade connection and
“SELF-LOCK” automatic air locking (PATENTED system)
- Easy cutting angle adjustment with graduated scale
- Rapid blade holder head change
- Automatic resting blade protection (on request)
 |
FAST-MAN Shear Cut
- quick format changes in manual mode
- carried out during a machine stop without material in the cutting zone
- 10 format changes possible in 2 to 3 minutes
|
SIDE TRIM Shear Cut
-
edge trim units are supplied with the “STILO®” system
-
available with either automatic or manual positioning
-
ideal for cutting most flexible materials
POP Shear Cut with automatic positioning
-
automatic positioning, by means of a brushless servo-motor,
controlled by the corresponding computer panel (CNC or PLC)
-
the computer decides which units will be in use and will move the
unused units to a “parking” or “shadow” zone
-
the computer automatically repositions units displaced during
maintenance or machine stops without further assistance from the
operator
-
up to 600 orders with precise formats can be stored and retrieved by
entering the order number on the display
-
as an example, format change time for 20 units, machine frame width
3.6 meters is roughly 1 minute
NON-STOP Shear Cut
- Continuous shear-cutting, even during format changes
- Mainly for calendering machines for plastics or on continuous
cardboard and paperboard production lines
- With the longitudinal NON-STOP cutting system, format changes can be
carried out with material in the machine and even during production
- Units can be positioned
- Manually, by means of a hand wheel
- Semi-automatically, by means of an electric motor, pneumatic
selector and 2 push buttons
- Automatically, by means of a brushless servo-motor, controlled by the
corresponding computer panel (CNC or PLC)
|
 |
RETROFIT
-
HELIOS modifies the longitudinal cutting system by removing the old
system and replaces it with a new cutting module that increases
productivity, improves quality and amortizes the cost of the
retrofit over a short period of time.
SCORE or PRESSURE CUTTING Type EK-30 and EPFS-48
- A traditional pneumatic blade holder system used for perforation, half and groove cutting
MULTIPLE RAZOR BLADE Holder Type S3 and S4 107/TL-C
- Recommended for thin plastic film up to a thickness of 25µ
- Equipped with safety protection with automatic closure
SINGLE RAZOR BLADE Holder Type S3 RB stroke 20 and S4 RB stroke 25
- To cut very thick plastic materials, over 2 mm
- Equipped with safety protection with automatic closure
ALL
HELIOS-ELIO CAVAGNA PRODUCTS ARE EQUIPPED WITH PATENTED EFFICIENT SAFETY
SYSTEMS THAT ARE ACTIVATED WHEN A PRODUCTION CYCLE IS INTERUPTED AND
WHEN MAINTENANCE OPERATIONS OR FORMAT CHANGES TAKE PLACE.
|
sales@webconvert-ltd.com
